Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July 2009)

Fabric Watch Administrator’s Guide 85
53-1001342-01
Appendix
A
Fabric Watch commands
In this appendix
The following table displays the Fabric Watch commands. Many of these commands are used in
advanced configuration. For more information about how to use these commands, refer to Chapter
6, “Fabric Watch basic configurations”.
Fabric Watch command Description
fanShow Display fan status
fwAlarmsFilterSet Configure alarms filtering for Fabric Watch
fwAlarmsFilterShow Show alarms filtering for Fabric Watch
fwClassInit Initialize all Fabric Watch classes
fwConfigure Configure Fabric Watch
fwConfigReload Reload Fabric Watch configuration
fwFruCfg Configure FRU state and notification
fwMailCfg Configure Fabric Watch e-mail Alert
fwPortDetailShow Create a report with detailed port information
fwSamShow Show availability monitor information
fwSet Set port persistence time
fwSetToCustom Set boundary and alarm level to custom
fwSetToDefault Set boundary and alarm level to default
portFencing Configures the Fabric Watch port fencing feature.
portThConfig Configures Fabric Watch event thresholds per port type.
sensorShow Show sensor readings
switchStatusPolicySet Set switch status policy parameters
switchStatusPolicyShow Show switch status policy parameters
switchStatusShow Show overall switch status
syslogdFacility Changes the syslog facility.
tempShow Show switch temperature readings