HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide

Installation and configuration 7
Variable name Description Example
TargetName Name of the target from
which to boot
TargetName=iqn.2003-
05.com.hp1510i:disk01
TargetIP Target IP in aaa.bbb.ccc.ddd
format
TargetIP=10.10.10.20
TargetPort Target Port, generally 3260 TargetPort=3260
TargetIP2 Secondary TargetIP TargetIP2=10.10.20.20
TargetPort2 Secondary Port TargetPort2=3260
InitiatorName Name used for the iSCSI
initiator on the booting
system.
InitiatorName=iqn.client01
InitiatorNetmask IP network mask used by the
iSCSI initiator. This value is in
dotted decimal format.
InitiatorNetmask=255.255.255.0
InitiatorRoute Default IP route used by the
iSCSI initiator. This value is in
dotted decimal format.
InitiatorRoute=10.10.10.1
LAA Locally Assigned Address
(MAC address) used by the
iSCSI initiator. This value is
specified as 12 hex digits. A
value of all zeros indicates
that the initiator should use the
MAC address assigned to the
hardware.
LAA=000000000000
LUN Logical Unit Number for the
target. Some targets do not
start numbering iSCSI target
data LUNs at 0.
LUN=0
AuthMethod The initiator and target must
agree on an authentication
method or the iSCSI initiator
can not log in to the target.
AuthMethod values are
"None, CHAP, and
MutualCHAP." If CHAP is
specified, the target can still
select None as the
authentication method. If
CHAP is specified,
CHAPUsername and
CHAPSecret also must be
specified. If MutualCHAP is
specified, CHAPUsername,
CHAPSecret and
CHAPMSecret also must be
specified.
AuthMethod=None
CHAPUsername User name for CHAP
authentication.
CHAPUsername=iqn.1991-
05.com.microsoft:comfort.txn.cpqcorp.net