HP StoreEver 1/8 G2 Tape Autoloader User and Service Guide (AK377-96024, December 2012)

Figure 56 Support: Reboot page
Viewing logs
From the Support: Autoloader Logs page you can see the device logs. The available logs are: Error
Trace, Informational Trace, Warning Trace, Configuration Change Trace, and Standard Trace.
The log entries are displayed in order of most recent to oldest. The format for the log entries is:
YY.MM.DD HH.MM.SS.ss LIB/ERR<80 89 62 40
• YY.MM.DD — the date displayed as Year.Month.Day
• HH.MM.SS.ss — the time displayed as Hour.Minute.Second.Hundredths of a second
• First code — hard or soft error. The code after LIB/ERR (80 in the example) will be 80 or 40.
80 indicates a hard error, 40 indicates a soft error.
• Second code — the main error code (89 in this example). See Error codes (page 104) for a
list of error codes and recovery procedures.
• Third code — the sub-code (62 in this example). See Error sub-code descriptions (page 117)
for a list of sub-codes.
• Fourth code — sub-code-specific information for factory use only
Figure 57 Support: Autoloader Logs page
Remote management interface (RMI) 63