HP StoreEver 1/8 G2 Tape Autoloader User and Service Guide (AK377-96024, December 2012)

Figure 43 Configuration: Network page
You may change the:
• Protocol version — selects the Internet Protocols that will be enabled. Select IPv4 only, IPv6
only, or both IPv4 and IPv6 protocols. The default is the IPv4 protocol only.
• Host Name — enter the host name provided by your network administrator for the autoloader.
• Domain name — enter the domain name provided by your network administrator for the
autoloader.
• Enable HTTPS — when On, the RMI can only be accessed through an HTTPS connection.
• Restricted Network Access — when On, disables all non-essential network functionality that
is not required for normal product operation. In most circumstances leave this On.
52 Operating the tape autoloader