HP StoreEver 1/8 G2 Tape Autoloader User and Service Guide (AK377-96024, December 2012)

• Updated — the day, date, and time of the most recent status view. This timestamp comes from
your computer and may be different from the autoloader Time at the bottom of the pane. Click
your browser's reload button to refresh the system status.
• Status of the autoloader and tape drive
The green Status Ok icon indicates that the device is fully operational and that no user intervention is
required.
The blue exclamation point Status Warning icon indicates that user attentionis necessary, but that the
device can still perform most operations.
The red X Status Error icon indicates that user intervention is required and that the device is not capable
of performing some operations.
• Slots (Free/Total) — Free is the number of empty storage slots. Total is the number of storage
slots available to the host software, which does NOT include reserved slots.
• Mailslot — shows whether the mailslot is open, closed, or disabled.
• Autoloader Time — the date and time from the autoloader, which can be set from the OCP
or RMI. The autoloader Time is updated when the system status is refreshed. The time of the
most recent refresh is the Updated time at the top of the pane. If you call HP Service to request
a temporary administrator password, refresh the system status with your browser reload button
and then give the service engineer this autoloader Time.
Getting help
For additional information about fields on the RMI screens, click on Help in the upper right corner
(see Figure 27 (page 38)). The help pages are updated with most firmware updates and often
contain technical details that are not contained in this document.
Figure 27 Help button
Identity
Viewing static device information
The Identity: Autoloader page provides static information about the device.
38 Operating the tape autoloader