HP StoreEver 1/8 G2 Tape Autoloader User and Service Guide (AK377-96024, December 2012)

Table 30 Main error codes (continued)
Details and solutionDescriptionError code
This error can occur is an attempt is made to
upgrade a drive with the wrong personality or
version for that drive.
Firmware upgrade errorD7
• Ensure that the correct drive firmware is being
used to update the drive.
• If the correct drive firmware is being used,
update the autoloader firmware.
• Power cycle the device and attempt the
operation again.
Power-cycle the unit.Autoloader controller data base errorD8
114 Troubleshooting