Administrator's Guide

Schedule Manager Screen
Setting Surveillance Schedule Timetables
Chapter 5
75
Setting Surveillance Schedule Timetables
Once you have defined a surveillance schedule with its complement of surveillance
groups and detection templates, you need to specify the days and times that the groups
will be active when the schedule is activated on an agent host. Use this procedure to
establish and change the times a schedule runs.
NOTE You cannot reset the timetable of a surveillance group if it is in a surveillance schedule
that is currently scheduled or running on an agent host. For more information, see
Chapter 4, “System Manager Screen,” on page 43.
IMPORTANT If one or more groups end and one or more groups start in adjacent time slots, there will
be a several second interval between the end of the former groups and the start of the
latter groups in which none of the groups will be running. If a group is scheduled across
adjacent time slots, it is not interrupted.
IMPORTANT While a schedule may contain more than 10 groups, it may have no more than 10 groups
active in any one-hour time slot.