Hitachi Dynamic Link Manager Software Users Guide for VMWare (7.6)

The following example shows how to display the number of times the
same path can be used for extended load balancing:
PROMPT>dlnkmgr view -sys -expathusetimes
Times Same ExPath Was Used : 100
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 3
The following example displays SATP information:
PROMPT>dlnkmgr view -sys -satp
SATP : HTI_SATP_HDLM
Default PSP : HTI_PSP_HDLM_EXLIO
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 4
The following example displays SATP claim rules:
PROMPT>dlnkmgr view -sys -rule
Vendor Model
HITACHI DF600F
HITACHI ^OPEN-*
HP ^OPEN-*
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To Display Program Information for a Remote Management Client
-sys [-msrv|-lic|-audlog]
Displays program information for HDLM installed on a remote
management client.
Use one of the sub-parameters (following -sys) to specify the program
information that you want to display. If you do not specify any sub-
parameters, the command displays the version and license information for
HDLM on the remote management client.
Table 6-7 Items of program
information (for remote management clients) on page 6-30 shows the
parameters you can specify and the displayed information.
-t
Does not display the title for each information item.
Command Reference
6-29
Hitachi Dynamic Link Manager User Guide for VMware
®