Hitachi Dynamic Link Manager Software Users Guide for Solaris (7.6)

To determine this path, perform the procedure in When the Path
Configuration Is Changed on page 4-17 in Precautions Regarding
Changes to the Configuration of an HDLM Operating Environment on page
4-17. To obtain the boot device name specified by OBP, edit the character
string of the determined path as follows:
¢
Replace the driver name (ssd) of an ssd driver with disk.
¢
Add the slice identifier of the / (root) file system (:a value from :a
to :h) to the end.
Example:
The determined path:
/pci@8,600000/QLGC,qlc@1,1/fp@0,0/ssd@w50060e8010027a82,6
The path to be specified for the OBP:
/pci@8,600000/QLGC,qlc@1,1/fp@0,0/
disk@w50060e8010027a82,6:a
11. Boot from the post-migration environment.
The following figure shows the actual boot disk.
Figure 3-18 Booting from the post-migration environment
12. When the host starts, confirm that the swap device and dump device
have been correctly configured. Then, use the mount command to confirm
that / (root) and /usr have been correctly configured.
3-124
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Solaris
®