Hitachi Dynamic Link Manager Software Users Guide for Linux (7.6)

Message ID Message Text Explanation
None.
KAPL01134-I The target paths are already
Online
or Online(S).
Details
The specified paths are already in
the Online or Online(S) status
as a result of an online operation.
Action
Check path status by using the
view operation.. For details on the
view operation, see
view
(Displays Information) on page
6-30.
For Online(S) paths:
To change the status of a path
from Online(S) to Online, re-
execute the HDLM command using
the -hapath parameter.
KAPL01154-W The dynamic I/O path control
function is already set to aa...aa
for the system.
Details
aa...aa: on or off
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for the host,
storage, and LUs. For details on
the view operation, see view
(Displays Information) on page
6-30.
KAPL01155-W The dynamic I/O path control
function is already set to aa...aa
for storage.
Details
aa...aa: on or off
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for storage. For
details on the view operation,
see view (Displays Information)
on page 6-30.
KAPL01156-I The dynamic I/O path control
function was set to aa...aa for
storage.
Details
aa...aa: on or off
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for storage and
LUs. For details on the
view
operation, see
view (Displays
Information) on page 6-30.
KAPL01157-I The dynamic I/O path control
function was set to aa...aa for
the system.
Details
aa...aa: on or off
Action
8-24
Messages
Hitachi Dynamic Link Manager User Guide for Linux
®