Hitachi Dynamic Link Manager Software Users Guide for Linux (6.6) (HIT5203-96005, November 2011)

RPM package version depends on the OS version you are using.

Storage Systems Supported by HDLM

The following shows the storage systems that HDLM supports.

Storage Systems

The following storage systems are supported by HDLM:

If an FC-SAN is used:

•

Hitachi AMS2000/AMS/WMS/SMS series

• Hitachi NSC55

• Hitachi TagmaStore Universal Storage Platform 100

• Hitachi TagmaStore Universal Storage Platform 600

• Hitachi TagmaStore Universal Storage Platform 1100

• Hitachi Universal Storage Platform V

• Hitachi Universal Storage Platform VM

• Hitachi Virtual Storage Platform

• HP StorageWorks P9500 Disk Array

• HP XP128/HP XP1024/HP XP10000/HP XP12000/HP XP20000/HP XP24000

• Lightning 9900 series

• Lightning 9900V series

• SVS

• Thunder 9500V series

If an IP-SAN is used:

• Hitachi AMS2000 series

Storage systems that are used must have a dual controller configuration. If

you use them in a HUB-connected environment, specify a unique loop ID for

all the connected hosts and storage systems. For details on the microprogram

version required for using HDLM, see HDLM Release Notes. For details on the

settings information for storage system, see the maintenance documentation

for the storage system.

Note:

For details on storage systems applicable to a BladeSymphony

environment or boot disk environment, see the following according to

your OS and version:

Boot Disk Environments and BladeSymphony Environments Supported

by HDLM on page 3-32