Hitachi Dynamic Link Manager Software Users Guide for Linux (6.6) (HIT5203-96005, November 2011)

Message ID Message Text Explanation
(aa...aa) function. File name =
bb...bb, Errno = cc...cc
An error occurred during
processing to read a file in the
(aa...aa) function.
bb...bb: File name
cc...cc: Errno
Action
Confirm that the configuration for
HDLM devices is correct.
If it is not correct, execute the
DLMgetras
utility for collecting
HDLM error information, and then
contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras
utility, see
DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
KAPL10944-I Checking will now start.
Checking interval = aa...aa,
Check count = bb...bb,
Maximum wait time = cc...cc
Details
Checking will now start.
aa...aa: Checking interval
bb...bb: Check count
cc...cc: Maximum wait time
Action
None.
KAPL10948-W An invalid entry is registered in
the file. File name = aa...aa
Details
An invalid entry is registered in
the file.
aa...aa: File name
Action
Edit the /etc/opt/
DynamicLinkManager/hdlm.conf
file as follows, and then restart
the host.
¢
For FC-SAN:
iscsi_boot=n
¢
For IP-SAN:
iscsi_boot=y
KAPL10949-E A necessary file was not found.
File name = aa...aa
Details
A necessary file was not found.
aa...aa: File name
Action
Reinstall an HDLM.
8-100
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))