Hitachi Dynamic Link Manager Software Users Guide for Linux (6.6) (HIT5203-96005, November 2011)

displayed by the dlnkmgr view -path -item
command and the parameter
values for displaying each item.
Table 6-11 Correspondence between the items displayed by the
dlnkmgr view -path -item command and the values of the -item
parameter
Items displayed by the dlnkmgr view
-path -item command
Values specified after the -item
parameter
PathID
#
None
PathName pn
HBAPortWWN hbaportwwn
DskName dn
iLU lu
ChaPort cp
Status
#
None
Type type
IO-Count ic
IO-Errors ie
DNum dnu
HDevName hd
IEP iep
#
Because both PathID
and Status are always displayed, you do not
have to specify any parameters.
In the sub-parameters following -path -item, you can list the paths
(-hdev) and sort the list (-srt). If you omit both parameters, the
command displays information for all the paths in ascending order of
AutoPATH_IDs.
These sub-parameters are:
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
Specify the name of the logical device file (minus the partition
number), /dev/sddlm[aa-pap], for the HDLM device. For details on
logical device files for HDLM devices, see
Logical Device Files for
HDLM Devices on page 2-11.
The host-device-name string is case-sensitive.
When you specify this parameter, HDevName is displayed by default. It
is not necessary to specify hd
for the -item parameter.
-stname
6-38
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))