Hitachi Dynamic Link Manager Software Users Guide for Linux (6.6) (HIT5203-96005, November 2011)

In the following example, the logical volume subject to the move has
been mounted on /mnt/lvol1:
# umount /mnt/lvol1
5. Deactivate the volume group.
In the following example, the logical volume to be moved belongs to the
vg01
volume group:
# vgchange -an vg01
0 logical volume(s) in volume group "vg01" now active
6. Export the volume group.
In the following example, the command exports information about the
vg01 volume group:
# vgexport vg01
Volume group "vg01" successfully exported
7. Edit the /etc/lvm/lvm.conf file.
Edit the device section in the file as shown below to disable the SCSI
device configuration and enable the HDLM device configuration:
¢
Adding and deleting filter entry information
Add the following line and comment out all other filter entry
information:
filter = [ "a|sddlm[a-p][a-p].*|", "r|/dev/sd|" ]
¢
Adding types entry information
Add the following line:
types = [ "sddlmfdrv", 16 ]
Make sure that types=[ "fd", 16 ] was commented out.
Figure 3-31 Example of Editing the /etc/lvm/lvm.conf File on page 3-174
shows an example of editing the file when the OS is SUSE LINUX
Enterprise Server 9. The shaded section shows the portion to be edited.
Creating an HDLM Environment
3-173
Hitachi Dynamic Link Manager User Guide (for Linux(R))