Software User Manual

Displayed Item
Description
No
summary
displayed
Summary
displayed
Indicates that an intermittent error occurred (automatic
failbacks do not check the path) (the path status is
Offline(E)).
HBAPortWWN
#1
-
A 16-digit hexadecimal number indicating the WWN
information for an HBA connected to the storage system.
This item is displayed only when you specify the -
hbaportwwn parameter or when you specify hbaportwwn for
the -item parameter.
VmRuntimeN
ame
#1
-
Displays the runtime information for paths managed by
VMware vSphere in path information fields. If you specify
the -vmruntimename parameter together with the -path
parameter, this information is displayed instead of the
PathName item.
VmState
#1
-
The path status managed by VMware vSphere. This item is
displayed only when you specify the -vmstate parameter or
when you specify vmstate for the -item parameter.
• active: Online
• standby: Online
• off: Offline status caused by a command operation
(Offline(C))
• dead: Offline due to an error (Offline(E))
• unavailable: Offline due to an error (Offline(E))
• perm_loss: Offline due to an error (Offline(E))
Paths that are dead, unavailable, or perm_loss require
corrective action. The appropriate action can be determined
by referring to
What To Do for a Path Error on page 5-2.
VmPathUID
#
1
-
The UID of the path managed by VMware vSphere. This
item is displayed when specified in a value of the -path -
item parameter.
Legend:
- : Not displayed
#1
The path information is displayed only when a value is specified for the -
path -item parameter.
#2
This storage system applies when the dynamic I/O path control function is
disabled.
Command Reference
6-41
Hitachi Dynamic Link Manager User Guide for VMware
®