Hitachi Dynamic Link Manager Software Users Guide for Solaris (7.6)

Message
ID
Message Text Explanation
KAPL10752
-I
The dlmsetboot utility completed
successfully. End time = aa...aa
Details
The dlmsetboot utility completed
successfully.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
None.
KAPL10753
-E
The dlmsetboot utility terminated
unsuccessfully. End time = aa...aa
Details
The dlmsetboot utility terminated
unsuccessfully.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
After the dlmsetboot utility
terminates, check the contents of
the messages. If the contents are
incorrect, correct them and then
try to execute this utility again.
For details on the dlmsetboot
utility, see
The dlmsetboot Utility
for Assisting Configuration of an
HDLM Boot Disk Environment on
page 7-22.
KAPL10754
-I
A user terminated the dlmsetboot
utility. End time = aa...aa
Details
Processing of the dlmsetboot
utility has been terminated
because the user replied to the
confirmation with an n response.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
None. For details on the
dlmsetboot utility, see The
dlmsetboot Utility for Assisting
Configuration of an HDLM Boot
Disk Environment on page 7-22.
KAPL10755
-I
Processing terminated before
completion because a signal was
received. End time = aa...aa
Details
The process has been terminated
by an operation such as Ctrl+C.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
The dlmsetboot utility terminated
before completion.
KAPL10756
-E
The entered value is invalid. The
dlmsetboot utility processing will
Details
Processing will stop because an
incorrect value was entered three
8-112
Messages
Hitachi Dynamic Link Manager User Guide for Solaris
®