Hitachi Dynamic Link Manager Software Users Guide for Solaris (7.6)

The dlminstcomp HDLM Component Installation Utility
This utility complements HDLM installation. Execute this utility when both of
the following conditions are satisfied:
• Linkage with Global Link Manager is used
•
When HDLM is installed, the KAPL09241-W message is output
#
#
Execute this utility after installing the JDK.
For details about the JDK version to be installed, see JDK required for
linking with other Hitachi Command Suite products in
Hosts and OSs
Supported by HDLM on page 3-3.
Format
/opt/DynamicLinkManager/bin/dlminstcomp [-h]
Parameter
-h
Displays the format of the dlminstcomp utility.
The dlmlisthdev Utility for Assisting HDLM Transitions
Use the dlmlisthdev utility when migrating to a newer version of HDLM from
HDLM 04-00 or 04-01 installed in a Solaris 8 or Solaris 9 environment. The
utility creates a correspondence table between the logical device file names of
the HDLM devices used in version 04-00 or 04-01 and those of the HDLM
devices created.
Format
/opt/DynamicLinkManager/bin/dlmlisthdev input-file-name
Parameters
input-file-name
Specifies, as an input file, the name of the output file that stores the
output result of the dlnkmgr command's view -path operation executed
before HDLM 04-00 or 04-01 was removed. You cannot specify multi-byte
characters.
Examples
Example
Referring to the output results of the dlnkmgr command's view -path
operation, which are saved in the /var/tmp/old_view_path_list.txt
7-20
Utility Reference
Hitachi Dynamic Link Manager User Guide for Solaris
®