Hitachi Dynamic Link Manager Software Users Guide for Solaris (7.6)

ManualsBrandsHP ManualsSoftwareHitachi Dynamic Link Manager for Windows Media Kit

Chapter/Appendix Description

Chapter 1, Overview of HDLM on

page 1-1

Gives an overview of HDLM, and describes its

features.

Chapter 2, HDLM Functions on

page 2-1

Describes management targets and the system

configuration of HDLM, and the basic terms and

functions for HDLM.

Chapter 3, Creating an HDLM

Environment on page 3-1

Describes the procedures for setting up an HDLM

environment and the procedure for canceling those

settings.

Chapter 4, HDLM Operation on

page 4-1

Describes how to use HDLM by using both the HDLM

GUI and commands, and how to manually start and

stop the HDLM manager. This chapter also describes

how to configure an environment to properly operate

HDLM, such as changing the HDLM management-

target devices that connect paths or replacing the

hardware that makes up a path. describes how to

check path information by using the Windows

management tool.

Chapter 5, Troubleshooting on

page 5-1

Explains how to troubleshoot a path error, HDLM

failure, or any other problems that you might

encounter.

Chapter 6, Command Reference

on page 6-1

Describes all the HDLM commands.

Chapter 7, Utility Reference on

page 7-1

Describes the HDLM utilities.

Chapter 8, Messages on page

8-1

Provides information about viewing messages output

by HDLM. It also lists and explains the HDLM

messages and shows the actions to be taken in

response to each message.

Appendix A, Sun Cluster 3.2

Commands on page A-1

Describes the Sun Cluster 3.2 commands.

Appendix B, Functional

Differences Between Versions of

HDLM on page B-1

Gives precautions on differences in functionality

between HDLM versions.