Hitachi Dynamic Link Manager Software Users Guide for Linux (7.6)

Message ID Message Text Explanation
• Confirm that the user has
write permission in the root
directory (/).
gzip:
Confirm that that the unused
capacity is sufficient at the
creation destination of the initial
ramdisk image file.
mke2fs or touch:
Confirm that the user has write
permission in the root directory
(/).
mkdir:
Confirm that there is enough
unused capacity and that the
user has write permission in the
following directory:
•
/etc/opt/
DynamicLinkManager.
• /opt/DynamicLinkManager.
•
The root directory (/)
mount:
Confirm that there is unused
capacity in the loop device.
umount:
A temporary file remains, so do
the following:
1. Unmount
/etc/opt/
DynamicLinkManager/tmp/
initrdmnt.$$ ($$ is a
process ID).
2. Remove the
/etc/opt/
DynamicLinkManager/tmp/
initrdmnt.$$ ($$ is a
process ID) file.
vol_id:
Confirm that the file system is
created in the root directory (/)
indicated by /etc/fstab file.
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM vendor
or the maintenance company if
there is a maintenance contract for
HDLM. For details on the DLMgetras
utility, see
DLMgetras Utility for
Messages
8-119
Hitachi Dynamic Link Manager User Guide for Linux
®