Hitachi Dynamic Link Manager Software Users Guide for Linux (7.6)

Figure 3-15 Example of Editing /etc/lvm/lvm.conf file
Comment out the existing filter
and types lines, and add the shaded
lines in the figure.
In addition, set md_component_detection to its original value before
installation.
8. Edit the boot loader configuration file so that the OS will start with a SCSI
device specified.
Edit the boot loader configuration file as shown in
Figure 3-16 Example of
Editing /etc/grub.conf file on page 3-169, Figure 3-17 Example of
Editing /boot/grub/menu.lst file (When using a kernel that supports Xen)
on page 3-170, and Figure 3-18 Example of Editing /etc/elilo.conf file on
page 3-170.
If you are using SUSE LINUX Enterprise Server, check the /boot/grub/
menu.lst
file instead of the /etc/grub.conf file.
Examples of editing the configuration file are shown below. See the
example for the boot loader you are using.
The detailed procedure is explained in steps 9 to 14.
Figure 3-16 Example of Editing /etc/grub.conf file
Creating an HDLM Environment
3-169
Hitachi Dynamic Link Manager User Guide for Linux
®