Hitachi Dynamic Link Manager Software Users Guide for Linux (6.6) (HIT5203-96005, November 2011)

Message ID Message Text Explanation
Action
Perform the dlmmkinitrd utility again
after performing the following check:
a. Confirm that the kernel of the
version displayed into the
message is installed.
b. In Red Hat Enterprise Linux,
confirm the kernel version
specified as a parameter.
For the details of the parameter,
see
dlmmkinitrd Utility for
Supporting a Boot Disk on page
7-31.
If the problem is not solved, execute
the DLMgetras
utility for collecting
HDLM error information, and then
contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras utility,
see
DLMgetras Utility for Collecting
HDLM Error Information on page 7-3.
KAPL12332-E The root partition could not
be found in the file. File
name = aa...aa
Details
aa...aa: The name of the file
referenced by the dlmmkinitrd
utility
for supporting the boot disk
Action
Confirm that the settings of the root
partition are in the /etc/fstab
file.
Confirm that the root partition is
mounted.
KAPL12333-E An HBA that HDLM can
support as a boot disk was
not found in the file. File
name = aa...aa
Details
aa...aa: The name of the file
referenced by the dlmmkinitrd utility
for supporting the boot disk
Action
Make sure that an HBA driver that
can be used when the boot disk is an
HDLM device is in the following file:
¢
When Red Hat Enterprise Linux
AS4/ES4 or Red Hat Enterprise
Linux 5 is used:
/etc/modprobe.conf
¢
When SUSE LINUX Enterprise
Server 10 or SUSE LINUX
Enterprise Server 11 is used:
The line of INITRD_MODULES= of
a /etc/sysconfig/kernel
file
Messages
8-111
Hitachi Dynamic Link Manager User Guide (for Linux(R))