Hitachi Dynamic Link Manager Software Users Guide for Linux (6.6) (HIT5203-96005, November 2011)

Message ID Message Text Explanation
Confirm that the user has write
permission in the root directory (/).
mkdir:
Confirm that there is enough unused
capacity and that the user has write
permission in the following directory:
¢
/etc/opt/DynamicLinkManager.
¢
/opt/DynamicLinkManager.
¢
The root directory (/)
mount:
Confirm that there is unused capacity
in the loop device.
umount:
A temporary file remains, so do the
following:
a. Unmount
/etc/opt/DynamicLinkManager/
tmp/initrdmnt.$$
($$ is a
process ID).
b. Remove the
/etc/opt/DynamicLinkManager/
tmp/initrdmnt.$$ ($$ is a
process ID) file.
vol_id:
Confirm that the file system is
created in the root directory (/)
indicated by /etc/fstab file.
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM vendor
or the maintenance company if there
is a maintenance contract for HDLM.
For details on the DLMgetras utility,
see
DLMgetras Utility for Collecting
HDLM Error Information on page 7-3.
KAPL12327-E An invalid entry is registered
in the file. File name =
aa...aa
Details
aa...aa: The name of the file
containing the invalid entry
Action
Take the following actions depending
on the file name output, and then re-
execute the dlmmkinitrd utility.
In the case of /etc/lvm/lvm.conf
file
Edit the following lines as
described in Settings for Using a
Logical Volume (LVM2) on an
HDLM Device as a Boot Disk on
Messages
8-109
Hitachi Dynamic Link Manager User Guide (for Linux(R))