Hitachi Dynamic Link Manager Software Users Guide for Linux (6.6) (HIT5203-96005, November 2011)

21. Perform an upgrade installation of HDLM.
To perform an upgrade installation of HDLM, see Performing an Upgrade
Installation of HDLM on page 3-91, perform steps 2 to 12 to create an
HDLM device. You will also need to perform step 13 if you are only
restarting the host. Note that the procedure differs depending on whether
the host is restarted after installation.
22. Execute the dlmcfgmgr utility with the -v
parameter specified to check
the correspondence between the HDLM device and the SCSI device.
# dlmcfgmgr -v
HDevName Management Device Host Channel Target Lun
/dev/sddlmaa configured /dev/sda 0 0 0 0
KAPL10302-I /sbin/dlmcfgmgr completed normally.
3-142
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))