Hitachi Dynamic Link Manager Software Users Guide for VMWare (7.6)

Return
Code
Explanation
Batch registration of Offline processing was performed.
Action
Refresh the host information, and then check the path status.
1023 Details
Batch registration of Offline processing has already been
performed.
Action
Refresh the host information, and then check the path status.
1025 Details
A parameter value is invalid.
Action
Refresh the host information, and then perform the operation again.
If the same error occurs again, execute the DLMgetras utility for
collecting HDLM error information, and then contact your HDLM
vendor or maintenance company if you have a maintenance contract
for HDLM. For details on the DLMgetras utility, see
The DLMgetras
Utility for Collecting HDLM Error Information on page 7-2.
1026 Details
The acquisition of path information has been aborted, because the
path configuration was changed while the system was attempting to
acquire the path information.
Action
Refresh the host information, check the path status, and then
perform the operation again.
1033 Details
An attempt to acquire the HDLM version information failed.
Action
Re-execute the command. If the same error occurs again, execute
the DLMgetras utility for collecting HDLM error information, and then
contact your HDLM vendor or maintenance company if there is a
maintenance contract for HDLM. For details on the DLMgetras utility,
see
The DLMgetras Utility for Collecting HDLM Error Information on
page 7-2.
1034 Details
An attempt to acquire information about the HDLM version or SP
version has failed.
Action
Re-execute the command. If the same error occurs again, execute
the DLMgetras utility for collecting HDLM error information, and then
contact your HDLM vendor or maintenance company if there is a
maintenance contract for HDLM. For details on the DLMgetras utility,
see
The DLMgetras Utility for Collecting HDLM Error Information on
page 7-2.
1035 Details
Messages
8-61
Hitachi Dynamic Link Manager User Guide for VMware
®