Hitachi Dynamic Link Manager Software Users Guide for VMWare (7.6)

Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example 1
The following example shows the LU information displayed when
ChaPort, LB, VmPSP, VmRuntimeName, and VmState are specified as
additional display items:
PROMPT>dlnkmgr view -lu -item cp lb vmpsp vmruntimename
vmstate
Product : SANRISE_AMS
SerialNumber : 77010152
LUs : 1
iLU HDevName LB VmPSP PathID
VmRuntimeName ChaPort Status VmState
0191 t10.HITACHI_770101520191 exlio HTI_PSP_HDLM_EXLIO 000000
vmhba2:C0:T0:L0 1B Online active
000001
vmhba5:C0:T0:L0 0B Online active
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 2
When using Hitachi AMS2000 series, Hitachi SMS series , or HUS100
series storage and displaying LU information with DPC added to the
display items:
PROMPT>dlnkmgr view -lu -item dpc
Product : HUS100
SerialNumber : 9203008
LUs : 3
Dynamic I/O Path Control : on*
iLU HDevName DPC PathID Status
000006 t10.HITACHI_770101520191 on 000000 Online
000003 Online
000007 t11.HITACHI_770101520191 off 000001 Online
000004 Online
000008 t12.HITACHI_770101520191 on 000002 Online
000005 Online
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To display a summary of LU information
-lu -c
Command Reference
6-45
Hitachi Dynamic Link Manager User Guide for VMware
®