Hitachi Dynamic Link Manager Software Users Guide for Solaris (7.6)

Message
ID
Message Text Explanation
For details on the dlmsetconf
utility, see The dlmsetconf
Utility for Creating the HDLM
Driver Configuration Definition
File on page 7-23.
c. Execute either of the following
commands to restart the host:
# reboot -- -r
boot -r (at the ok prompt)
KAPL09149
-E
An attempt to update the file has
failed. File name = aa...aa, Details
= bb...bb. Please contact product
support.
Details
An HDLM driver configuration
definition file or HDLM driver
unconfiguration definition file,
aa...aa, could not be updated.
aa...aa: One of the following file
names:
¢
/kernel/drv/dlmfdrv.conf
¢
/opt/DynamicLinkManager/
config/dlmfdrv.unconf
¢
/kernel/drv/
dlmfdrv.conf.bak
¢
/opt/DynamicLinkManager/
config/dlmfdrv.unconf.bak
bb...bb: Internal code (decimal
number)
Action
Execute the DLMgetras utility for
collecting HDLM error information
to obtain the error information.
Contact your HDLM vendor or your
maintenance company if you have
a maintenance contract for HDLM.
For details on the DLMgetras
utility, see
The DLMgetras Utility
for Collecting HDLM Error
Information on page 7-3.
KAPL09171
-E
An internal error occurred in the
installation of the HDLM. Error
Code = aa...aa,bb...bb
Details
A system-based error, not caused
by the user, occurred during
installation of HDLM processing.
aa...aa: Error number (decimal
number) that specifies the
executed processing
bb...bb: Return value (decimal
number) of the executed
processing
Action
Messages
8-65
Hitachi Dynamic Link Manager User Guide for Solaris
®