Hitachi Dynamic Link Manager Software Users Guide for Solaris (7.6)

Message
ID
Message Text Explanation
HDLM manager could not start
normally because it was unable
to open the option definition file.
aa...aa: Option definition file
name
Action
Check whether another program
is currently using this file (for
example, the file is being opened
in a text editor), or whether the
file has been inadvertently
deleted.
KAPL04009
-E
The option definition is invalid. Details
HDLM manager could not start
normally because some of the
definitions in the option definition
file were invalid.
Action
If the KAPL04033-W message is
output after this message,
execute the dlnkmgr view -sys
-sfunc command, and then
check the option settings.
Use the dlnkmgr set operation
to return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
If the same error occurs, re-
install HDLM.For details on the
view operation, see
view
(Displays Information) on page
6-32. For details on the set
operation, see set (Sets Up the
Operating Environment) on page
6-17.
KAPL04010
-E
Could not open the error log file. Details
HDLM manager cannot start
normally (unable to open the
error log file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log).
Action
Check whether another program
is using the file (for example, the
file is being opened in a text
editor), or whether the error log
file has been inadvertently
deleted.
8-34
Messages
Hitachi Dynamic Link Manager User Guide for Solaris
®