Hitachi Dynamic Link Manager Software Users Guide for Solaris (7.6)

Figure 3-19 Current boot disks and boot disks after the migration
The LU device names of the current boot disks are c8t50060E08000436D1d4
and c8t50060E08000436D1d5, and the LU device names of the boot disk after
the migration are c6t50060E08000436D1d6 and c6t50060E08000436D1d7, as
shown in the above figure.
In the examples of commands and settings here, assume that the following
slices are allocated:
• Slice 0: / (root) file system
• Slice 1: Swap device and dump device
• Slice 6: /usr file system
• Slice 7: SVM state database
1. Decide the metadevice names.
The metadevice names of the current boot disks and the boot disks after
the migration are specified as shown in
Table 3-25 Metadevice names on
page 3-128.
Table 3-25 Metadevice names
Boot disk File system Mirror Sub mirror
Current /(root)
d100 d101
d102
swap d200 d201
d202
3-128
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Solaris
®