Hitachi Dynamic Link Manager Software Users Guide for AIX (7.6)

Parameters
This section describes the parameters for the view operation, in the following
order:
To Display Program Information on page 6-35
To Display Path Information on page 6-42
To Display LU Information on page 6-54
To Display HBA Port Information on page 6-64
To Display CHA Port Information on page 6-66
To Display the Correspondences Between hdisks, OS Management Path IDs,
and LDEVs on page 6-67
To Display the Format of the View Operation on page 6-68
To Display Program Information
-sys [-sfunc|-msrv|-adrv|-pdrv|-lic|-audlog|-lbpathusetimes|-
expathusetimes]
Displays the HDLM program information.
Use one of the sub-parameters (following -sys) to specify the program
information that you want to display. If you do not specify a sub-
parameter, the command displays all of the program information except
the information about the audit log data collection settings, the number of
times the same path can be used for load balancing, and the number of
times the same path can be used for extended load balancing.
Table 6-10 Displayed Program Information on page 6-35 describes the
specifiable parameters, displayed information, displayed items, and a
corresponding description.
-t
Does not display the title for each information item.
Table 6-10 Displayed Program Information
Parameter
and
program
informatio
n to be
displayed
Item Description
-sfunc
Information
about the
HDLM
function
settings
HDLM Version HDLM version number
Service Pack
Version
HDLM SP version number. This item is blank if no a
SP is present.
Load Balance Settings for load balancing
• Setting status:
on: Enabled
Command Reference
6-35
Hitachi Dynamic Link Manager User Guide for AIX
®