User Manual Part 2

3. Enter a name for the settings. This name is for your reference.
4. Tap Modem > New…
5. Enter a service provider name in the Enter a name for the connection box.
6. Select the appropriate modem from the Select a modem list.
To configure settings using a telephone number:
a. Select the Cellular Line option from the Select a modem list.
b. Tap Next.
c. Enter a telephone number in the text box, and then tap Next.
To configure settings using access points:
a. Select the Cellular Line (GPRS, 3G) option from the Select a modem list.
b. Tap Next.
c. Enter an access point name of the server to which you are attempting to connect in the Access
point name box, and then tap Next.
7. Enter the user name and password.
8. Enter a domain name if provided by your ISP.
9. Tap Finish.
Troubleshoot automatic detection
If the automatic detection setting fails, complete one or more of the following items:
ł
Check to see if the SIM card is present in the HP iPAQ. If it is not present, insert the SIM card and
relaunch the application.
ł
Ensure that the metal contacts on your SIM card and your SIM slot are not covered with a residue
or dust that would inhibit a connection.
ł
In the HP iPAQ DataConnect application, select the appropriate country and operator name, and
then tap ok. The settings automatically update.
Advanced settings
Connect to intranet URLs
To connect to intranet sites that have periods in their URLs (for example, intranet.companyname.com),
add them to the Work URL Exceptions list.
To connect to intranet URLs:
1. Tap Start > Settings > Connections > Connections > Advanced > Exceptions…
2. Tap Add new URL…
3. In Work URL, enter the intranet URL.
4. Tap ok.
NOTE: If you use many URLs that share the same root company name, you can avoid entering them
individually by entering *.companyname.com.
84 Chapter 14 Connections