User Manual Part 1

Video recorder
Record videos
You can use the built-in camcorder on your HP iPAQ to create short videos and share them with your
friends and family.
To record videos:
1. Tap Start > Programs > Camera.
2.
Tap
(Video) icon to go into the video mode.
3. Press the Camera key to start recording. Press the Camera key again to stop recording.
Video settings
To configure settings for recording videos:
1. Tap Start > Programs > Camera.
2.
Tap the (Settings) icon.
3. Tap the Video tab.
4. Configure the following settings:
ł
Video Format – Select the video format.
ł
Resolution – Select a resolution for your videos from the available options: QCIF(176 X
144) or QVGA(320 X 240).
ł
Record Voice – Select this check box to record audio along with the video.
ł
Fit to MMS – Select this check box to ensure that the recorded video does not exceed the
file size that an MMS can hold.
Options for camera and video recorder
Icon Description
Device – This icon displays the number on the left top corner of the screen that indicates how many
photos you can save to the current storage device. The storage devices available are phone memory
and external storage card.
Flash off – Tap to turn the flash on.
Flash on – Tap to turn the flash off.
3M
Resolution – Tap to change the resolution.
Exit – Tap to exit the application.
HP Photosmart Mobile – Tap to launch HP Photosmart Mobile to view the captured photos.
Video – Tap to switch to the camera mode.
Video recorder 43