User Manual Part 1
NOTE: Your HP iPAQ might take several minutes, depending on the environment, to connect to the
network for the first time when roaming in another country.
To avoid problems once you are out of the country, follow these tips before you leave:
ł
Visit your mobile phone service provider's Web site to see if their service is available where you
are traveling.
ł
Verify if your mobile phone account is set up for international roaming and if additional charges
apply.
Copy all contacts from your HP iPAQ to a SIM
When using the SIM card in multiple devices, you can copy contacts from your HP iPAQ to a SIM.
1. From the Today screen, tap Contacts or press the right softkey.
2. Tap Menu > Copy to SIM.
3. Tap OK to copy the contacts or Cancel to go back to the previous screen.
4. From the Today screen, tap Contacts or press the right softkey and search for the added contacts
to verify if you copied the contacts to your SIM.
Copy all contacts from a SIM to your HP iPAQ
When using multiple SIM cards with your HP iPAQ, you can copy contacts from a SIM to your HP iPAQ.
1. From the Today screen, tap Contacts or press the right softkey.
2. Tap Menu > Copy from SIM.
3. Tap OK to copy the contacts or Cancel to go back to the previous screen.
4. From the Today screen, tap Contacts or press the right softkey and search for the added contacts
to verify if you copied the contacts to your HP iPAQ.
Add Tele-typewriter (TTY) functionality
Add TTY functionality for people who are hearing impaired or
hard-of-hearing
HP iPAQ products support Tele-typewriter (TTY) functionality, which allows people who are hearing
impaired or with hearing limitations to communicate using existing telephony infrastructure, including
cell phones. To achieve this, separately purchased TTY devices must be connected to the telephones
on both ends of a telephone call session, and the HP iPAQ must be configured for TTY use. The sending
TTY device generates a distinct audio tone for every supported character, and these tones are decoded
and converted back into text on the receiving TTY device.
Due to the use of audio compression codecs in modern digital cell phones, these TTY audio tones might
be unintentionally distorted while being transmitted through cell phones. Therefore, in order for TTY
devices to continue to work in cellular networks, the cell phone must be set into a mode that optimizes
the compression codec to handle TTY tones instead of the human voice.
To use TTY with the HP iPAQ, an optional TTY audio adapter must be plugged into the HP iPAQ headset
connector. This TTY audio adapter converts the pin-out of the headset connector, which is designed for
a wired ear bud and stereo headphones, to the pin-out required by most TTY devices. To purchase the
Copy all contacts from your HP iPAQ to a SIM 33










