Owners manual
Table Of Contents
- The basics
- The control panel
- Printing
- Overview
- Orienting media
- Basic printing instructions
- Selecting the output bin
- Printing on envelopes
- Printing on special paper
- Printing on both sides of paper (duplexing)
- Using features in the printer driver
- Setting the registration
- Different first page
- Including a blank back page
- Printing multiple pages on one sheet of paper
- Customizing Tray 1 operation
- Specifying paper to print on
- Job storage features
- Printing a private job
- Releasing private jobs
- Deleting a private job
- Storing a print job
- Printing a stored job
- Deleting a stored job
- Creating a QuickCopying job
- Printing additional copies of QuickCopy jobs
- Deleting a QuickCopy job
- Proofing and holding a job
- Printing the remaining copies of a held job
- Deleting a held job
- Copying
- Faxing
- Output devices
- Security features
- MFP maintenance
- Problem solving
- Specifications
- Control panel menus
- MFP memory and expansion
- Regulatory information
- Administration tasks
- Using the HTML Help Viewer
- Using accessibility shortcut keys in the Help Viewer
- Index
76 Chapter 4 Copying ENWW
Note The page icon in the Original section of the graphical display shows a representative image of
the original document.
7 Make any necessary adjustments to the contrast and reduction or enlargement by using the
Contrast Control bar and the Reduce/Enlarge button in the image modification section of
the graphical display.
8 Touch Copy to view your options. You can select Basic options or Advanced options.
9 Touch the Basic items that describe the characteristics of the copies you are making. The
following options are available:
• Size and Type: Select Auto (paper size is matched to original size), or the copy size that
you desire. Be sure that you have loaded the correct paper size in the tray.
• Number of Sides: Select 1-sided or 2-sided.
• Back Side Orientation: Select Normal or Flip (applies when 2-sided copying is
chosen),
• Pages per sheet: Select 1, 2, 4, or Booklet.
If you select 4 pages per sheet, “Z” or “N” ordering is tailored to the page orientation, and the
option to put a border around each smaller page is displayed.
.
• Borders: Select Border or No Border.
• Staple: Stapling options depend on your output device and the paper size selected.
10 Touch the Advanced options, if necessary. Some of the options include the following items:
• Collation: Select Collated or Uncollated.
• Output Bin: Select the appropriate bin.
• Job Storage: Select On to indicate that the copy job should be stored on the MFP rather
than printed. Select Off to copy the job normally. See Creating a stored copy job for more
information.
• Enhance: touch Sharpness or Background Removal.
Note The page icon in the Copy section of the graphical display shows a representative image of the
copy.
11 Use the numeric keypad to type the number of copies, and then press
START.
“Z” ordering
“N” ordering