Owners manual
Table Of Contents
- The basics
- The control panel
- Printing
- Overview
- Orienting media
- Basic printing instructions
- Selecting the output bin
- Printing on envelopes
- Printing on special paper
- Printing on both sides of paper (duplexing)
- Using features in the printer driver
- Setting the registration
- Different first page
- Including a blank back page
- Printing multiple pages on one sheet of paper
- Customizing Tray 1 operation
- Specifying paper to print on
- Job storage features
- Printing a private job
- Releasing private jobs
- Deleting a private job
- Storing a print job
- Printing a stored job
- Deleting a stored job
- Creating a QuickCopying job
- Printing additional copies of QuickCopy jobs
- Deleting a QuickCopy job
- Proofing and holding a job
- Printing the remaining copies of a held job
- Deleting a held job
- Copying
- Faxing
- Output devices
- Security features
- MFP maintenance
- Problem solving
- Specifications
- Control panel menus
- MFP memory and expansion
- Regulatory information
- Administration tasks
- Using the HTML Help Viewer
- Using accessibility shortcut keys in the Help Viewer
- Index
62 Chapter 3 Printing ENWW
Setting the registration
Use the Set Registration feature to center the front and back images on a page that has been
duplexed (printed on both sides). This feature also allows edge-to-edge printing to be set to
within approximately 2 millimeters of all edges of the paper. Image placement will vary slightly for
each input tray. The alignment procedure must be performed for each tray. An internal-tray
registration page allows the administator to calibrate each tray.
To set the registration
1 Touch Menu.
2 Touch Configure Device.
3 Touch Print Quality.
4 Touch Set Registration.
You can select a tray by specifying a Source. The default Source is Tray 2. If you want to set the
registration for Tray 2, go to step 7. Otherwise, proceed to the next step.
5 Touch Source.
6 Touch a tray. After you touch the tray, the control panel display returns to the Set
Registration menu.
7 Touch Print Test Page.
8 Follow the instructions on the printed page.