Owners manual
Table Of Contents
- The basics
- The control panel
- Printing
- Overview
- Orienting media
- Basic printing instructions
- Selecting the output bin
- Printing on envelopes
- Printing on special paper
- Printing on both sides of paper (duplexing)
- Using features in the printer driver
- Setting the registration
- Different first page
- Including a blank back page
- Printing multiple pages on one sheet of paper
- Customizing Tray 1 operation
- Specifying paper to print on
- Job storage features
- Printing a private job
- Releasing private jobs
- Deleting a private job
- Storing a print job
- Printing a stored job
- Deleting a stored job
- Creating a QuickCopying job
- Printing additional copies of QuickCopy jobs
- Deleting a QuickCopy job
- Proofing and holding a job
- Printing the remaining copies of a held job
- Deleting a held job
- Copying
- Faxing
- Output devices
- Security features
- MFP maintenance
- Problem solving
- Specifications
- Control panel menus
- MFP memory and expansion
- Regulatory information
- Administration tasks
- Using the HTML Help Viewer
- Using accessibility shortcut keys in the Help Viewer
- Index

142 Chapter 10 Problem solving ENWW
To clear jams in the 8-bin mailbox
Note Check that the paper used is not thicker than the 8-bin mailbox supports. See Media specifications.
1 Move the 8-bin mailbox away from the MFP. To do this, stand on the left side of the MFP and
pull the 8-bin mailbox straight toward you.
2 Carefully remove the upper (face-up) bin.
3 Pull down the handle on the output paper module and remove any jammed paper from this
area.
4 Push the 8-bin mailbox back into place, and then reattach the upper bin.