Owners manual

ENWW 165
6 Close the top cover.
Note It is a good idea to inspect the
input trays when clearing jams. However,
opening and closing input trays has no
effect on clearing jam messages.
7 Pull out the tray and place it on a
flat surface.
8 Remove any partially fed media.
Grasp the media by both corners
and pull down.
9 Inspect the media path to ensure
that it is clear.
Note If the media tears, make sure that
all media fragments are removed from
the paper path before resuming printing.
10 Check to make sure the media is
located correctly and underneath
the front corner tabs. Insert the tray
into the printer. Make sure all trays
are completely closed.
1
6
1
7
1
8
1
10