User's Manual

Use the HP sp400 Series Configuration Software
General tab
The General tab displays information about the All-in-One, the battery, and the print cartridge. The
values on the General tab cannot be edited.
Device
The Device section displays basic information about the device.
• Name: The name of the individual All-in-One device. The name may be changed for identification
purposes. For further information, refer to the
Communication Protocols manual, which is available
at
www.hp.com/support/handheldsp400aio.
• Serial Number: The serial number is also printed on the bottom of the All-in-One, beneath the
hand mount.
• MAC Address: The Ethernet address of the All-in-One device. The MAC address may be used by
the Wi-Fi® access point for MAC address filtering.
• Current IP Address: The current IP address will be displayed whether a static or dynamic IP
address is used. “DHCP” will not be displayed if DHCP is in use. “0.0.0.0” is displayed if the device
is not connected to a wireless network.
• Current Port: The current network port in use by the All-in-One device. “0” is displayed if the
device is not connected to a wireless network. The current port may be changed on the Server tab.
• FW Version: The version of the installed firmware. If the version name begins with “F,” Wi-Fi is
being used; if the version name begins with “B,” Bluetooth is being used.
• FPGA FW Version: The build date of the FPGA configuration firmware.
• Imager FW Version: The version of the imager firmware.
• Comm FW Version: The version of the communications module firmware (Wi-Fi or Bluetooth).
10