CLI Reference Guide

Getting Acquainted
Reference Guide 2–31
Align the Screen
When you turn on the screen of your iPAQ Pocket PC for the first
time, you are guided through the alignment process. Realign your
screen if:
■ The iPAQ Pocket PC does not respond accurately to your taps
■ You performed a restore following a data backup
■ You performed a hard reset of your iPAQ Pocket PC
To align the screen:
1. From the Start menu, tap Settings.
2. Tap System, then the Screen icon.
3. Tap the Align Screen button.
4. Tap the cross object at each location. Be precise when you tap
the cross object.
5. Tap OK.
Use the Self-Test
You can use the self-test to verify the proper operations of various
features and functions. Technical support may ask to perform this
test while they are troubleshooting problems.
To perform a self-test:
1. From the Start menu, tap Settings.
2. Tap the System tab, then Self-test.
3. Select the tests you want to perform. The default is all tests.
4. Tap Next.
5. Select “Perform an Automatic Reset before the test.”
6. Tap Next to begin the test.
281984-001.book Page 31 Thursday, September 26, 2002 5:05 PM