CLI Reference Guide

2–30 Reference Guide
Getting Acquainted
3. Hold all buttons until the displayed image begins to fade
(approximately four seconds).
4. Release the application buttons and stylus.
✎
You can verify a full reset by pressing the power button. If the
iPAQ Pocket PC has been fully reset, it will not turn on.
5. Reactivate the battery by:
❏ Removing and reinstalling the battery
❏ Connecting the iPAQ Pocket PC to AC power
❏ Pressing the Reset button with the stylus
6. Set up your iPAQ Pocket PC.
Perform a Normal Reset
A normal reset is sometimes referred to as a “soft reset.” You
perform a normal reset when you want to stop all running
applications. A normal reset will not erase any programs or data
stored in RAM or ROM.
Ä
CAUTION: A normal reset will erase all unsaved data.
To perform a normal reset:
1. Locate the reset button on the bottom of the iPAQ Pocket PC.
2. Lightly press the normal reset button for 2 seconds.
✎
The iPAQ Pocket PC will restart in approximately five seconds
and display the Today screen.
281984-001.book Page 30 Thursday, September 26, 2002 5:05 PM