Hardware reference guide

You need the following to complete this procedure:
●
PCI-Express card
●
Phillips head screwdriver
WARNING! Before removing the side access panel, ensure that the thin client is turned off and the
power cord is disconnected from the electrical outlet.
CAUTION: Do not remove the inner metal side cover when performing this procedure.
To remove the PCI-Express card:
1. Locate the PCI-Express card installed in the expansion module.
2. Grasp the PCI-Express card carefully and pull it straight out of the expansion socket.
NOTE: Store the PCI-Express card carefully to prevent damage.
To install the PCI-Express card:
▲
Hold the expansion card next to the expansion socket in the expansion module. Press the card
straight into the expansion socket.
NOTE: Press firmly on the card so that the whole connector seats properly in the expansion card
slot.
Figure 2-11 Installing the PCI-Express graphics card
External Drives
Various external USB drives are available as options for these thin clients. For more information about
these drives, visit
http://www.hp.com and search for your specific thin client model, or refer to the
instructions that accompany the option.
For more information about available options, visit the HP Web site
http://www.hp.com and search for
your specific thin client model.
ENWW Installing Thin Client Options 21