Hardware reference guide

2. Lift the module up and away from the chassis (2).
Figure 2-4 Removing the expansion module
To remove the metal side cover:
1. Remove the four screws that secure the metal side cover to the chassis (1).
2. Lift the metal side cover, front side first, off the unit (2).
Figure 2-5 Removing the metal side cover
Replacing the Metal Side Cover, Expansion Module, and Side Access
Panel
This section has three main steps:
●
Replace the metal side cover.
●
Replace the expansion module holding the PCI-Express card.
NOTE: This step applies only to the HP gt7725 thin client with Expansion Module installed.
●
Replace the access panel.
16 Chapter 2 Hardware Changes ENWW