User's Manual

Configuration
Configuring the High Availability Feature for X.25 over LLC2
Chapter 386
The user supplied, unique MAC address that is specified in the XOL
configuration file as a value for the field XOL_floating_macaddr, for that
LAN segment is uMAC.
The XOL interface with X.121 address 1111 is brought up on lan0 on
system A (uMAC is automatically assigned to lan0 on system A when the
XOL interface is initialized).
Figure 3-13 Before the Failover
When the lan0 (the primary LAN card) fails, the XOL interface stops on
lan0, and a XOL interface is brought up automatically on lan1 (the
standby LAN card on system A) using the same configuration file. An
attempt is made to configure lan0 with the factory default MAC address,
and uMAC is assigned to lan1 on system A during the local failover. The
X.25 connection must be re-established on the XOL interface. When the
card lan0 comes up later, it is configured with the factory default MAC
address.