User's Manual

Configuration
Configuring X.25 over LLC2
Chapter 370
To configure the Host to LAN 0, BOX 0 communication the following
configuration files need to be created.
• Generic X.25 configuration file, x25_lan_0_box_0
• LLC2 configuration file, llc2_lan_0_lan_1
The x25_lan-0_box_0 file will contain all the level 3 and level2
parameters. It also contains the following entries:
device lan0
XOL_logical_port_id 1
XOL_destination_macaddr 0x080009411371
XOL_DSAP 0x70
XOL_SSAP 0x70
The LLC2 configuration file, llc2_lan_0_lan_1 will have the following
entires:
lan0 1
lan1 1
To configure Host to LAN 1 to BOX 1
To configure the Host to LAN 1 to BOX 1communication, the following
configuration file need to be created.
• X.25 generic configuration file, x25_lan_1_box_1
• LLC2 configuration file, llc2_2_lan_0_lan_1
The x25_lan_1_box_1 file is created in the /etc/x25 directory. It will
contain all the level 2 and level 3 parameters. It will also contain the
following entries:
device lan1
XOL_logical_port_id 1
XOL_destination_macaddr 0x080009C4728A
XOL_DSAP 0x7E
XOL_SSAP 0x7E
There is only one LLC2 specific configuration file per Host. The file is
llc2_lan_0_lan_1.
To Start and Stop above configuration: