User's Manual

Configuration
Configuring X.25 over LLC2
Chapter 3 69
lan2 1
To start and stop above configuration:
Starting:
Execute the following commands at the command prompt:
x25init -c x25_box_1_host -L llc2_lan_2
Stopping:
To stop the configuration execute the following commands:
x25stop -d lan2 -L 0 # stop XOL interface with logical port id 0 on lan2
Configuring Two Lans, with One Box Per Lan
A graphical representation of the above configuration with some
arbitrary values for the MAC addresses and lan-ids is as shown:
Figure 3-12 Two Lans, One Box per Lan configuration
To Configure Host to LAN0 to Box0