User's Manual

Configuration
Configuring X.25 over LLC2
Chapter 3 65
<XOL_logical_port_id> is the XOL logical port identifier for the XOL
interface on the given LAN card.
NOTE SAM support is not available for configuring X.25 over LAN(LLC2). Also,
the x25init command needs to be executed manually if the system is
rebooted.
Refer to the x25overllc2(7) manpage for a more detailed description of
the configuration. To configure XOL High Availability, see the HA section
for enabling, disabling, starting and stopping the XOL high availability
feature.
Also note that the x25init(1M), x25stop(1M),and x25stat(1M) manpages
have been modified to include the LLC2 information.
NOTE To configure a Highly Available XOL interface, See “X.25 High
Availability Configuration” on page 81.
Sample setup and Configuration
The X.25 over llc2 supports one or more XOL interfaces. Following are
the two example configurations:
One Lan and Two Boxes configuration
A graphical representation of the above configuration with some
arbitrary values for the MAC addresses and lan-ids is shown below: