User's Manual

Configuration
Configuring X.25 over LLC2
Chapter 362
#standby_device lan1 # standby lan card for local failover.
#XOL_floating_macaddr 0x0060B0A4EBE5 # Unique Mac address to be assigned to the
lan card before bringing the XOL interface up.
# Level 2 Parameters
#
t1 3000
t3 60000
framesize 149
n2 20
l2window 7
# Level 3 Parameters
# virtual circuit parameters
# logical channel id, start num [1-4095], type, how many
lci 1 pvc 5 # 5 permanent VCs
lci 255 insvc 5 # 5 one-way incoming SVCs
lci 2048 svc 6 # 6 two-way switched VCs
networktype TRANSPAC # CCITT 1984, DTE (see /etc/x25/x25_networks)
fast_select enabled # allow incoming calls with call user data
reverse_charge enabled # allow incoming calls requesting reverse changes
def_inpacketsize 128 # default packetsize
def_outpacketsize 128 # default packetsize
def_inwindow 7 # default window size
def_outwindow 7 # default window size
def_inthruputclass 19200 # default thruput class
def_outthruputclass 19200 # default thruput class
flowcontrol on # flow control negotiation allowed
neg_inpacketsize 128 # offered packet size if using flow control negotiation
neg_outpacketsize 128 # offered packetsize if using flow control negotiation
neg_inwindow 7 # offered window size if using flow control negotiation
neg_outwindow 7 # offered window size if using flow control negotiation
thruputclass on