User's Manual

Configuration

Configuring X.25 over LLC2

Chapter 360

** Required for HA feature

NOTE The configuration parameters may be specified in the old format.

However, HP recommends that you use the new format while specifying

the configuration parameters. XOL is not supported over APA (Auto Port Aggregation).

ollowing are two sample files. Example 3-1 provides a sample file that

has the old parameters in the old format. Example 3-2 provides a sample

file that has the new parameters in the new format.

Example 3-1 Sample File with the Old Parameters in the Old Format

device lan00x7c

lan_box_id 1

lan_box_addr 0x080009c4728a 0x7e

Example 3-2 Sample File with the New Parameters in the New Format

device lan0

XOL_logical_port_id 1

XOL_destination_macaddr 0x080009c4728a

XOL_DSAP 0x72

XOL_floating_macaddr** One

hexadecimal

value; must be

prefixed with

The unique MAC

address for the LAN

card in the LAN

subnet. For more

details about this

parameter, see

“Configuring the High

Availability Feature

for X.25 over LLC2” on

page 84. Required

only for local failover

support.

Table 3-16 Additional XOL specific configuration parameters (Continued)

Field Format Value