User's Manual

Configuration
Configuring X.25 over LLC2
Chapter 3 59
XOL_destination_macaddr
(replaces the MAC address
in the lan_box_addr)
One
hexadecimal
value. This
value must be
prefixed with
0x.
The destination MAC
address to which the
XOL interface is
connected.
XOL_DSAP One
hexadecimal
value. This
value must be
prefixed with
0x.
The destination SAP
value of the peer XOL
interface. Set the
value of DSAP to any
even value in the
range 0x70 - 0x7e,
both inclusive.
XOL_SSAP One
hexadecimal
value. This
value must be
prefixed with
0x.
The source SAP value
of the local XOL
interface. Set the
value of SSAP to any
even value in the
range 0x70 - 0x7e,
both inclusive. If the
value for SSAP is not
provided, then SSAP
takes the value of
DSAP.
standby_device** Device name
string
Name of the standby
LAN device used for
local failover. For more
details about this
parameter, see
“Configuring the High
Availability Feature
for X.25 over LLC2” on
page 84. Required
only for local failover
support.
Table 3-16 Additional XOL specific configuration parameters (Continued)
Field Format Value