User's Manual

Configuration
Configuring X.25 over LLC2
Chapter 358
NOTE The parameters introduced in an earlier release of X.25 are supported.
However, HP recommends that you migrate to the new parameters.
Migration is required for XOL HA support.
Table 3-16 lists the XOL specific parameters that must be defined while
configuring an XOL interface.
Table 3-15 Patch requirements for the XOL HA feature and configurable
SAP values feature for X.25 over LLC2
X.25 version
Number
Patch Requirements
B.11.11.00 Supported with Patch PHNE_34754 or
superseding patch
B.11.11.01 Included (No patch required)
B.11.23.01 Not supported
B.11.23.02 Not supported
B.11.23.03 Supported with Patch PHNE_34753 or
superseding patch
B.11.31.01 Included (No patch required)
Table 3-16 Additional XOL specific configuration parameters
Field Format Value
device Device name
string.
Name of the LAN card
where the XOL
interface is
configured.
XOL_logical_port_id
(replaces lan_box_id)
Integer 0-n The XOL logical port
identifier for the XOL
interface on the given
LAN card.