User's Manual

Diagnostic Messages
X.25 Diagnostic Messages
Appendix C 263
243
(CLEAR)
Disconnectio
n.
Incompatible
info in user
data.
Application closed or shut down socket
because of incompatible information in
the user data field. Related to the
x29server process.
244
(CLEAR)
Connection
rejection.
Reason
unspecified
(transient
condition).
Application rejected the CALL for an
unspecified reason. No listen socket
was found. Related to the x29server
process.
245
(CLEAR)
Connection
rejection.
Reason
unspecified
(permanent
condition).
Application rejected the CALL for an
unspecified reason. No listen socket
was found. Related to the x29server
process.
248
(CLEAR)
Connection
rejection.
Incompatible
info in user
data.
Application closed or shutdown socket
because of a problem with the user
data information. Related to the
x29server process.
250
(RESET)
Reset. User
re-
synchronizati
on.
PVC is claimed by programmatic
access socket. RESET is sent as part of
socket initialization procedure. Code is
used if the application did not specify
which cause/diagnostic combination to
use. Application requires RESET to be
sent. No cause/diagnostic combination
is specified on socket.
Table C-10 Higher Level Initiated (Continued)